This product is a portable appliance with the following functions:digital video ,camera ,motion detection ,Mobile capacity and pc camera. 3,Operation
1)Turn on: If the equipment is off,after you press the button 5,the double
lights burn,the equipment enters into the status of standby. A,If there is not the card inside,the double lights will shine to
remind the user. B,If it is full,the double lights will burn to remind the user. C,If there is any of the above stations,the equipment will power
off in one minute.
2)Camera: In the status of standby,press the button 5,the equipment takes one
picture and save it as the file,*JPG,the lights shine one time at
the same time. 3)Video:
In the status of standby,press the button 5 for about two
seconds,it starts to take video,the double lights will alternately
flash. 4) Light director:
When the equipment is working,please press the buton 3,the double
lights shine for ten times.When you press the button 3 for about
three seconds,the double lights shine for five times slowly.The
work status will not be changed during the shining of lights.
5)Motion Detection:
In the status of standby,press the button 3 for about five
seconds,the double lights will be off after two seconds,the
equipment will enter into the status of motion detection
standby,when there is any object moving during the working area of
the equipment,it starts to take video for about 30 seconds and save
it,then the equipment enters into the motion detection standby
again.After you press the button 5,the double lights will burn and
enter into the status of standby.
6)Off:
In the status of standby,the equipment will be off after you press
the button 5 for about 4 seconds,the double lights will be off
after shining two times.The equipment will save the file at the
same time. 7)Low Power:
The equipment will be off after the double lights shine for two
times if the power is low.Before it is off,it will save the file.
8)Charging:
When you connnect the equipment and the PC or power equipment,it
will be charged.During the charging,the double lights is
burning.After it is full,the double lights will be off.
9),Charging Video:
After you connect the equipment and PC or power source,the double
lights will burn.If you press the button 3 three times,the lights
of equipment will be off after it shines three times slowly.The
equipment enters into the status of standby.
10)Save file:
After you connect the equipment and the PC,you can move and edit
the file freely. Notice:When it is off,the equipment is used as a U disc.
11)PC CAMERA
Before you want to use it as a pc camera,you must install the
software.The software as the accessary of the equipment when you
buy it.After you start the software,you can find there is a PC
Camera sign on the screen.
12)Time Reset
Please connect the equipment and pc, the equipment will be used as
a mobile disc, then,you need to set up in the mobile disc a file
named as TIME.TXT,the instruction of content should be showed as
the following: 2007.04.22 11:20:30 YYYY.MM.DD TT.MM.SS After you move the mobile disc properly,the time reset will finish.
13) Reset
When there is not any answer from the equipment for the wrong
operation or any other unknown reason |
